Travertine Stripe Wall Sconce

Travertine Stripe Wall Sconce — vertical stone bar, warm up & down wash, two models. A slim vertical bar of yellow travertine — ∅ 5 cm, just wide enough to hold two G9 sockets at its top and bottom ends — mounts flush to the wall and washes warm light upward and downward simultaneously. The stone surface catches and scatters the light outward along its length, the pores and fossil inclusions visible in the glow. The result is a wall composition that is architectural at distance and geological up close. Available in Model A and Model B (differing in stone orientation and vein pattern) and in three heights: 60, 80, and 120 cm. Yellow Travertine — formed by nature, unrepeatable by craft Each Travertine Stripe bar is cut from yellow travertine — a sedimentary limestone formed over millennia. The pore distribution, amber veins, fossil inclusions, and tonal variation of every piece differ. Product photographs are reference examples only. Your sconce will be its own singular geological object. Tap to enlarge — travertine surface reference. Your piece will differ. Features Vertical Travertine Bar ∅ 5 cm slim stone profile — a quiet geological line on the wall. Up & Down G9 Wash G9 at both top and bottom — warm light fans upward and downward across the wall. 3 Heights · 2 Models 60 / 80 / 120 cm × Model A and Model B — 6 configurations total. Models & Heights Model A and B share the same dimensions. They differ in travertine cut and vein direction. Tap each image to enlarge. Model A H 60 cm ∅ 5 × H 60 cm ∅ 1.9″ × H 23.6″ H 80 cm ∅ 5 × H 80 cm ∅ 1.9″ × H 31.5″ H 120 cm ∅ 5 × H 120 cm ∅ 1.9″ × H 47.2″ Model B H 60 cm ∅ 5 × H 60 cm ∅ 1.9″ × H 23.6″ H 80 cm ∅ 5 × H 80 cm ∅ 1.9″ × H 31.5″ H 120 cm ∅ 5 × H 120 cm ∅ 1.9″ × H 47.2″ Bulb & Light Source G9 — 2 sockets (top + bottom), bulbs not included Each sconce has two G9 sockets — one at the top of the stone bar and one at the bottom — each directing light outward from the stone's end face. A warm-white G9 LED at 2700–3000 K is strongly recommended — the warm amber tone enhances the travertine's fossil character and creates a rich upward-and-downward wall wash. A frosted G9 capsule LED at ~5W per socket is appropriate for the slim ∅ 5 cm bar form. Two bulbs are required per sconce. Guide to G9 LED bulb selection →