Aperture Wall Sconce

WALNUT-FINISH RESIN · MATTE BLACK STEEL · FROSTED GLOBE · 15″ TALL · HARDWIRED · G9 A capsule-shaped backplate in walnut-finish resin with a suspended frosted globe — pendant-style sconce on a 15-inch silhouette Aperture is a wall sconce that reads like a small framed pendant — a vertical capsule backplate in walnut-finish resin, with a slim matte-black steel rod descending to a frosted glass globe at the bottom. The capsule's recessed interior catches the warm glow and bounces it across the wall, doubling the visual brightness without doubling the bulb count. Compact at 14 cm wide × 38 cm tall (5.5″ × 15″) — sized for hallways, bedside flanking, narrow consoles, and powder-room walls. Hardwired installation by a licensed electrician. G9 socket, bulb sold separately. Walnut-Finish Capsule Sculpted resin backplate with a warm walnut wood-grain finish — gives the look of natural walnut at an accessible price, with consistent grain and no maintenance. Matte Black Steel Rod Slim vertical rod and circular ring frame in matte black powder-coated steel — provides architectural contrast against the warm wood-grain backdrop. Hardwired Installation Connects to a standard wall junction box — requires a licensed electrician. G9 socket with frosted glass globe diffuser, bulb sold separately. What it's made of Backplate Sculpted resin with walnut wood-grain finish — not solid wood Hardware Matte black powder-coated steel — rod, ring frame, wall mount Diffuser Frosted opal glass globe — diffuses warm light evenly Light Source 1 × G9 socket — bulb sold separately Each Aperture is one-of-a-kind. The warm walnut tone you see is a wood-grain finish on a sculpted resin backplate, not solid wood. This keeps Aperture at an accessible price compared to solid-walnut sconces, while still delivering the visual warmth of walnut. Avoid abrasive cleaners or alcohol-based solvents which can dull the finish. Looking for real walnut? See our Forma Wood collection — both built from solid walnut at higher price points. Aperture is the accessible alternative for buyers who want the look without the price. Dimensions Click to enlarge ↗ Width 14 cm / 5.5″ Height 38 cm / 15″ Weight ~1 kg / 2 lb Installation HARDWIRED · LICENSED ELECTRICIAN REQUIRED Wall Junction Box Installation Aperture connects to a standard recessed wall junction box (single-gang or 4″ round). Total fixture weight is approximately 2 lb (1 kg) — well within any modern junction box's load rating. The wall mount is anchored at the top of the capsule. We recommend a licensed electrician for installation, particularly in bathroom and powder-room locations where moisture exposure must be assessed before final placement. Renovating a hallway, bedroom, or powder room? Aperture is best installed during electrical rough-in, before drywall is finished. If you're retrofitting an existing wall, your electrician will likely add or relocate a junction box at the planned mount point — typically a 30-60 minute job per sconce. Bulb · Sold separately G9 · TWO-PIN BASE 1 × G9 Bulb G9 is a small two-pin base — about the size of a USB plug. Widely available on Amazon, Home Depot, and Lowe's under "G9 LED bulb." We recommend a 25-40W equivalent LED in 2700-3000K warm white — the warm tone reads beautifully through the frosted globe and complements the walnut-finish backplate. Avoid halogen G9s entirely — they run hot, and the resin backplate is best paired with low-heat LEDs only. For dimming, choose a Triac-dimmable G9 LED and pair with a standard Triac wall dimmer.