Lyra Alabaster Wall Sconce

SOLID ALABASTER · BRONZE-FINISH HARDWARE · 63″ VERTICAL · HARDWIRED · INTEGRATED LED A 63-inch alabaster capsule with a slim bronze spine — a vertical sconce designed to flank tall mirrors and stairwells Lyra is a vertical wall sconce built around a 63-inch alabaster capsule — translucent stone that glows softly across its full length when lit. A slim bronze-finish steel spine runs down its center, anchored at four bronze disc points to the wall. Hardwired installation by a licensed electrician. Sized for tall mirror flanking, stairwell pairings, and dramatic entry foyers — anywhere a single statement vertical light reads better than a row of shorter sconces. The capsule is just 7.1″ wide and 4.3″ deep, so it sits flat against most architectural walls. Solid Alabaster Capsule Cut from natural alabaster — translucent stone with fibrous veining unique to each piece. Glows softly along its full 63-inch length. Bronze-Finish Spine Slim vertical bronze-finish steel spine with four disc anchor points — provides architectural rhythm against the soft glow of the alabaster. Hardwired Installation Connects to a standard junction box — requires a licensed electrician. Integrated LED with ~50,000 hour rated life. What it's made of Capsule Solid natural alabaster — translucent, hand-cut, fibrous veining unique to each piece Hardware Bronze-finish steel — spine, disc anchors, and wall mount Light Source Integrated LED strip distributed along the inner capsule Each alabaster capsule is one-of-a-kind. Alabaster is natural translucent stone formed over millennia — fibrous veining direction, tonal warmth, and translucency vary between every piece we cut. About the bronze-finish hardware. The spine, disc anchors, and wall mount are bronze-finish steel — not solid bronze. The antique-bronze tone is a durable powder-coated finish. Installation HARDWIRED · LICENSED ELECTRICIAN REQUIRED Junction Box Installation Lyra connects to a standard recessed junction box. Total fixture weight is approximately 12 lb (5.5 kg). The wall mount is anchored at the top, with three additional disc points stabilizing the 63-inch length. We recommend installation by a licensed electrician. Renovating? Best installed during electrical rough-in. For retrofitting, your electrician may need 30-60 minutes per sconce to secure the anchoring system. Color temperature DEFAULT 3000 K Warm White Soft amber-toned glow that complements the natural cream of alabaster. Integrated LED strip distributed along the full length. Rated for roughly 50,000 hours. Need a different color temperature? 4000 K neutral or 6000 K cool white available on request — message us before placing your order. Dimensions Click to enlarge ↗ Width 18 cm / 7.1″ Height 160 cm / 63″ Depth 11 cm / 4.3″ Weight ~5.5 kg / 12 lb